See our full capacity list

Capacity List

Jones Nuttall Ltd have a large selection of automatic and manual machines and can offer the appropriate machine to do the job, be it a repetitive small component or a large “one off.”

Capability up to 6000mm X-Axis 1500mm Y-Axis 1500mm Z-Axis

1 X Hurco VM42SRTi
X-Axis 1270mm Y-Axis 508mm Z-Axis 508mm A-Axis 200mm diameter Chuck

X, Y, Z, A Axis Travel: 1,270 x 508 X 508 X 270 mm
Spindle Nose to Table: 101.6 mm
Table Size: 1,321 x 508 mm
Max Weight On Table: 907 kg
T-Slot Size: 5 x 18 mm
Peak Spindle Motor: 15.0 kW
10k: 102 Nm @ 1,450 rpm
Tool Type: CAT 40
Max Tool Diameter: 90 mm
Max Tool Length : 250 mm
Max Tool Weight: 7 kg
Max Programmable Feedrate: 24 m/minute
Rapid Traverse X,Y,Z Axis: 24 m/minute, 24 m/minute, 24 m/minute
Machine Height: 2,543 mm
Required Floor Space: 4,086 x 2,859 mm
Machine Weight: 4,245 kg
X-Axis 1270mm Y-Axis 508mm Z-Axis 508mm

X, Y, Z Axis Travel: 1,270 x 508 X 508 mm
Spindle Nose to Table: 101.6 mm
Table Size: 1,321 x 508 mm
Max Weight On Table: 907 kg
T-Slot Size: 5 x 18 mm
Peak Spindle Motor: 15.0 kW
10k: 102 Nm @ 1,450 rpm
Tool Type: CAT 40
Max Tool Diameter : 90 mm
Max Tool Length : 250 mm
Max Tool Weight: 7 kg
Max Programmable Feedrate: 24 m/minute
Rapid Traverse X,Y,Z Axis: 24 m/minute, 24 m/minute, 24 m/minute
Machine Height: 2,543 mm
Required Floor Space: 4,086 x 2,859 mm
Machine Weight: 4,245 kg
1 x Hurco VM10i VM CNC
X, Y, Z Axis Travel: 660 x 406 X 508 mm
Spindle Nose to Table: 101.6 mm
Table Size: 762 x 406 mm
Max Weight On Table: 680 kg
T-Slot Size: 3 x 18 mm
Peak Spindle Motor: 11.0 kW
10k: 73.6 Nm @ 1,450 rpm
Number Of Tools: 20
Tool Type: BT 40
Max Tool Diameter: 90 mm
Max Tool Length: 250 mm
Max Tool Weight: 7 kg
Max Programmable Feedrate: 24 m/minute
Rapid Traverse X,Y,Z Axis: 24 m/minute, 24 m/minute, 24 m/minute
Machine Height: 2,564 mm
Required Floor Space: 3,204 x 2,931 mm
Machine Weight: 2,818 kg
3 x Hurco Hawk 40 VMC
Table Size: 1473 X 330 mm
Table Load Capacity: 449kg
Travels (X / Y / Z axis): 1016/508/508 mm
Spindle Quill Travel: 152 mm
Spindle Quill Diameter: 110 mm
Spindle Nose to Table Top: 90 to 599 mm
Spindle Center to Face of Column: 508 mm
Rapid Traverse (X / Y / Z axis): 10160/10160/6350 ipm
Spindle Taper: 40
Spindle Speeds: 80 - 3800 rpm
Spindle Drive Motor: 5.0 hp
Machine Size: 2870 x 2057 x 2489
Machine Weight: 2495 kg
Electrical: 220v
Starrag Twin Head CNC
4M bed
Twin Head, each head has a range of 2.4m
Travels X Axis 4000mm Y Axis 1000 mm Z Axis 1000 mm
Vertical travel 1000 mm (Head to work bed)

Capability up to 450mm diameter

Mazak Nexus 250MS-2 Twin Spindle with Bar-feed
The QUICK TURN NEXUS 250-II MS CNC Turning Center with Multi-Tasking capability brings together advanced technology, productivity and value to deliver exceptional performance. As an (MS) configuration, the machine features milling capability as well as main and second turning spindles to process parts in Done-In-One operations.
Plus, the machine comes equipped with the Matrix Nexus 2 CNC control. Featuring, both, Mazatrol conversational programming and EIA-ISO programming, as standard. For fully automated operations, the machine is outfitted with a bar to maximize productivity.
MACHINE CHARACTERISTICS:
  • Powerful main turning spindle
  • Second turning spindle
  • Rotary tool milling spindle
  • Automatic tool eye
    • CAPACITY:
      Chuck size main spindle: 10 "
      Chuck size secondary spindle: 6 "
      Maximum swing: 675 mm
      Maximum machining diameter: 380 mm
      Bar work capacity main spindle (dependant on chuck system): 80 mm

      MAIN SPINDLE:
      Rotating speed maximum: 4,000 min-¹
      Motor output (30 minute rating): 26.0 kW

      SECONDARY SPINDLE:
      Rotating speed maximum: 6,000 min-¹
      Motor output (25% ED rating): 11.0 kW

      TURRET:
      Number of tools: 12 (all 12 can be driven)
      Mill spindle motor output (10 minute rating): 5.5 kW

      FEED AXES:
      Travel (X axis): 230 mm
      Travel (Z axis): 575 mm

      MACHINE DIMENSIONS:
      Length: 2,813 mm
      Width: 1,780 mm
MAZAK Quick Turn Nexus 200 with Magazine Bar Feed
The QUICK TURN 250M CNC turning center with Multi-Tasking capability brings together advanced technology and productivity to deliver exceptional performance with a standard through-hole chuck, and integral turning spindle motor, this QUICK TURN features milling (M) capability to efficiently process a wide range of parts in a single setup. Plus, the machine comes with the SmoothG CNC that features MAZATROL conversational programming and EIA-ISO programming.
MACHINE CHARACTERISTICS:
• Powerful, integrated main turning spindle
• Rotary tool milling spindle
• CNC programmable tailstock
• Through-hole chuck
• Automatic tool eye

CAPACITY:
Maximum Swing: 675 mm
Maximum Machining Diameter: 380 mm
Maximum Bar Work Capacity: 65 mm
Maximum Machining Length: 504 mm

MAIN SPINDLE:
Chuck Size: 254 mm
Maximum Speed: 4000 rpm
Motor Output (30 minute rating: 35.0 hp / 26 kw

TURRET (Upper):
Number of Tools: 12
Maximum Speed: 6000 rpm
Motor Output (10 minute rating): 10.0 hp / 8 kw

FEED AXES:
Travel (X Axis): 230 mm
Travel (Z Axis): 575 mm
Travel (W Axis): 550 mm
Mazak 200m Live Tooling/Magazine Bar-feed
The QUICK TURN 200M CNC turning center with Multi-Tasking capability brings together advanced technology and productivity. Plus, the QUICK TURN 200M comes with the SmoothG CNC that features MAZATROL conversational programming, complete with monitoring and diagnostics, and EIA-ISO programming as standard. Along with a standard through-hole chuck and integral turning spindle motor, this QUICK TURN features milling (M) capability to efficiently process a wide range of parts in a single setup. For fully automated operations, the machine is outfitted with a bar feeder for even higher levels of productivity.
MACHINE CHARACTERISTICS:
• Powerful main turning spindle
• Rotary tool milling spindle
• CNC programmable tailstock
• Through-hole chuck
• Automatic tool eye

CAPACITY:
Maximum Swing: 675 mm
Maximum Machining Diameter: 380 mm
Maximum Bar Work Capacity: 65 mm
Maximum Machining Length: 538 mm

MAIN SPINDLE:
Chuck Size: 203 mm
Maximum Speed: 5000 rpm
Motor Output (30 minute rating): 35.0 hp / 26 kw

TURRET (Upper):
Number of Tools: 12
Maximum Speed: 6000 rpm
Motor Output (10 minute rating): 10.0 hp / 8 kw

FEED AXES:
Travel (X Axis): 230 mm
Travel (Z Axis): 575 mm
Travel (W Axis): 550 mm
2 x Cincinnati Hawk 200m-C Axis/Live Tooling/Magazine Bar-feed
Distance between centres: 1088 mm
Max Swing over bed: 400mm
Max Swing over cross slide: 308mm
Diameter of bar up spindle: 65mm
Diameter tailstock position: 894mm
Cross Travel – X Axis: 245mm
Longitudinal Travel –Z Axis: 540mm
Feed Range (Infinitely variable): 1-630 IPM
Rapid Traverse Rate (X-Axis): 630 IPM
Rapid Traverse Rate (Y-Axis): 1000 IPM
No of turrets: 1
Tool Positions: 12 total
Spindle Nose: A2-6
Spindle Speed Range: (IRPM Increments) 30 - 4500 RPM
Spindle Horsepower: 15HP
Machine Dimensions: 1478 x 965mm
Machine Height: 1621mm
Weight: 4672kg
Hurco TMM8 C-Axis/Live Tooling/Magazine Bar-feed
The TMM8 slant-bed lathe with live tooling is the efficient solution for small to medium lot sizes that require turning and secondary milling/drilling operations. Saving time with one setup and no loss of accuracy due to refactoring.
The C-Axis programs to .001 degree and it is standard on this Hurco lathe with live tooling. The TMM8 uses a fast servo turret instead of hydraulic to increase productivity.
X, Z Axis Travel (mm): 198 x 508
Swing Over Cross Slide (mm): 300
Distance Between Centers (mm): 588
Max Cutting Diameter (mm): 256
Max Cutting Length (mm): 455
Bar Capacity, (mm): 52
Peak Spindle Motor Kw: 13.2
Max Spindle Motor Torque, ft lbs (Nm) @ rpm: 4.8k 258 (350) @ 360
Rapid Traverse X, Z Axis, ipm (M/min: 750 / 945 (19 / 24)
Tool Shank (mm): 1 (19) Square
Tools: 12 / Axial
3 Jaw Chuck (mm): 203
Turret Index Time - Adjacent (sec): 0.23
Positioning (mm): 0.010
Repeatability (mm): 0.005
Weight (Kg): 4,000

LIVE TOOLING:
HP (Kw): 6 (4.4)
Torque, ft lbs @ rpm (Nm @ rpm): 5K 21 (28) @ 1,500
Tooling: VDI 30 / DIN 5480 / Axial
Hurco TM10 CNC Lathe-Magazine Bar-feed
Maximum Cutting Diameter: 450 mm
Machine Weight: 5000kg
Traverses XYZ: 250 x 750 mm
Spindle Speed: 3500 RPM
Spindle Motor Power: 29Kw
Chuck Size: 250 mm
Bar Capacity: 78mm
Control WinMax
Distance between centres: 695mm
Swing over the cross-slide: 402 mm
Tool size: 25 x 25 mm
Turret Positions: 12 position
Maximum cutting length: 720 mm
Harrison VS450 CNC Lathe
Fanuc Control
Swing over bed: 483 mm
Distance between centres: 1524 mm
Indexing Tool Post
406 mm 4 Jaw Chuck

Capability 3200mm X-Axis 2100mm Y-Axis 200mm Z-Axis

CNC Dynamics Router-Tool-changer 3200 x 2100 MTR Table.
• Fixed table, moving gantry CNC Router. Flat bed with matrix vacuum table.
• HSD 9kw Automatic tool change spindle. 12 to 18 station tool magazines with automatic tool length setting.
• Programmable spindle speeds to 24000 rpm. Spindle speed options up to 50,000rpm.
• ‘Quickset’ component probing system for fully automated set up.
• Multi spindle borer unit with horizontal drilling in the X and Y plane.
• AlphaCam Cad Cam system. Optional machine loading systems. Full CE conformity.

X-Axis Travel: 3100mm
Y-Axis Travel: 2170mm
Z-Axis Travel: 200mm
Table Size: 3200 x 2100 mm
Feed Rate X-Axis: 0-40m/min
Feed Rate Y-Axis: 0-40m/min
Rapid X/Y Axes: 0-80m/min
Rye Gemini 1500 CNC Router- 4 heads 1 x 1.5m Table
2 x Router Head 25mm diameter Collet
5.0 kW, 1,000-20,000 rpm
2 x Electric Drill 13mm chuck
0.75 kW, 500-3,000 rpm
X Axis travel: 1700 mm
Y Axis travel: 1000 mm
Z Axis travel: 180 mm
Table size: 1700 x 1000 mm
Table height: 850 mm
Height (machine): 2350 mm
Height (extraction): 2750 mm
Rye Gemini 1500 CNC Router- 2 Heads 1 x 1.5m Table
2 x Router Head 25mm diameter Collet
5.0 kW, 1,000-20,000 rpm
X Axis travel: 1700 mm
Y Axis travel: 1000 mm
Z Axis travel: 180 mm
Table size: 1700 x 1000 mm
Table height: 850 mm
Height (machine): 2350 mm
Height (extraction): 2750 mm
Sanding-master 3000 - 900mm wide sanding capacity
Working width: 900mm
Max. working height: 150mm
Main motors *: 18 + 15kW
Variable feed speed motor (4 - 20 m/min): 2.2kW
Sanding belt dimensions
Exhaust requirement at 100 mm/WG: 930 x 1900mm
Air displacement: 4800m3/h
Dust extraction units: 200 - 160mm
Air connection: 6atm.
Air consumtion : - with pneumatic oscillation: 160l/min., - with electronic oscillation: 30l/min.
Net weight: 2500kg
Steton Circular Saw- 2m long capacity
Working table 1150×650 mm and independent scoring motor.

TECHNICAL DATA:
• Dimensions of aluminum carriage: 2200×270 mm.
• Squaring length with scoring unit: 1700 mm.
• Max. Blade diameter – bore: Ø 315 – 30 mm.
• Scoring blade diameter: Ø 100
• Motor power: 4 (3) Hp (Kw)
• Scoring motor power: 0,5 (0.37) Hp (Kw)
StartRite Band Saw
3 phase metal cutting band saw
10 Speed Drive
2 Speed gearbox
485 mm Table 600 mm Throat depth
254 mm Daylight
External Dimensions (W X D X H) 1100 X 500 X 1800 mm
Haco Guillotine TSL 308 3000 MTR Bed – Cuts up to 8mm
Capacity 8mm x 3050 mm
Amada Promecam HFT 100:30 CNC Press-brake – 3m bed/100 Tonne
100 Ton x 3000mm Hydraulic Downstroking Press Brake
8 Axis X1, X2, Y1, Y2, R1, R2, Z1 & Z2
Bending Length: 3110mm
Open Height: 470mm
Stroke Length: 200mm
Throat Depth: 420mm
Motor Size: 7.5kW
Amada Auto Horizontal Band-saw
Ceaweld BSW 25 Spot & Projection Welder Also known as a Resistance welder
Single phase input 50/60 Hz: 400V
Rated power at 50%: 25kVA
Short-circuit power: 65kVA
Max. welding power: 52kVA
Installed power: 14kVA
Cross section connecting cables: 16mm2
Fuse(delayed action): 40A
Secondary voltage: 3,7V
Secondary short circuit current: 18kA
Max welding current: 14,4kA
Secundary thermal current at 100%: 4,8kA
Work stroke: 50mm
Electrode force at 600kPa (6bar): 187daN
Water consumption at 300 kPa (3bar): 4l/min
Dimensions: 800mm, 300mm, 590mm
Weight: 96kg
ISM Induction Brazing Machine
Brazing and soldering systems offer permanent and strong metal-to-metal joints with three primary benefits.

1) Flexibility: Brazing is the joining of metals by use of heat and filler metals. As the most versatile method of joining metals, brazed joints are strong, ductile, easy and quick to make, suited to the joining of dissimilar and similar metals, and the result of a one-operation process.

2) Economy: Highly adaptable to automated methods, brazing as a process allows you to match your production output to your requirements to decrease or eliminate waste.

3) Strength: Rigid and resistant to shock and vibration, brazing creates a metallurgical joint, at the molecular level, between the filler metal and the surfaces of the metals being joined.
Induction Welding Machine
3 x Kemppi Fast Mig 400 Amp KMS 400
Connection Voltage (3~, 50/60 Hz): 400 V (-15...+20%)
Rated Power at Max. Current: 18.5 kVA / 19.5 kVA
Output: 80% ED: 400A/34 V
100% ED: 380A/33 V
Open Circuit Voltage: MIG: 65V
MMA: 50V
Efficiency at Max. Current: 87%
Welding Range: MIG: 20A/12V-400A/36V
MMA: 10A/20V-400A/36V
Dimensions: L: 590 mm x W: 230 mm x H: 430 mm
Weight: 35 kg
Flux-Cored (FCAW)
MIG (GMAW)
Stick (SMAW)
Pulsed MIG
2 x Kemppi Master Tig 3000 Amp ACDC
Connection voltage 3-50/60 Hz: 380-440v (+/- 10%)
Fuse (delayed): 10A
Output (TIG) 30% ED: 300A/22.0 V
Output (TIG) 60% ED: 230A/19.0 V
Output (TIG) 100% ED: 200A/18 V
Output (MMA) 40% ED: 250A/30V
Output (MMA) 60% ED: 205A/28.2V
Output (MMA) 100% ED: 160A/26.4V
Open Circuit voltage: 80VDC
Stick electrode sizes: 1.5…5.0mm
Welding Range (MMA): 10 A/20.5V…250 A/30.0 V
Welding range (TIG): 5 A/10.0V…300 A/22.0 V
Operating temperature range: -20…+40°C
External dimensions: L x W x H 500 x 180 x 390 mm

We also have manual machines including

Herbert 47V Vertical Mill
Table size: 1829 X 432 mm
Spindle Speed: Slow 21-750 rpm, Fast 43-1525 rpm
Spindle Taper 50ISO
Motor: 7.5/15 hp
Overall dimensions: 2591 mm, 2032mm, 2794mm
Travel: x/y/z 1219 x 457 x 457 mm
Spindle Centre to column: 508mm
3 x Bridgeport Turret Mill
2 Axis DRO System
Power feeds to X Axis
Spindle Taper R8
Table Size: 1245 x 299 mm
Vari Speed Head
Weight: 1200 kg
T-slot centre distance 3 @ 64mm
T-slot size: 16mm
Maximum Weight of Workpiece: 340kg
High Speed 500 -4,200 RPM @ 60 Hz
Slow Speed 60- 500 RPM @ 60 Hz
Travel Table: (X-Axis) 914mm with power feed, (Y-Axis) 305mm, (Z-Axis) 406mm
Jones and Shipman Grinders
ODI Radial Arm Drill
Spindle Speed: 31-830 rpm’s
Spindle Motor: 7.5HP
Travel on Arm: 5ft
With power on column: Column travel 711mm
Column diameter: 406mm
Riser Tooling Block: (1295 x 914 x 508 mm) with 6 each 25mm T-slots
Tapered spindle: #5
Machine Base: 3556 x 1067mm with 4 each 29mm wide T-slots
Colchester Master 3250 Lathe
Work Envelope: W x D x H Ø700 X 1250 mm
External dimensions: W x D x H 2500 x 1000 x 1600 mm
Swing over bed: 350 mm
Distance between Centers: 1250mm
Spindle Bore: 42mm
Spindle Speeds: 17 – 3250 rpm
Butler 12” Precision Toolroom Slotter
Throat Depth: 622 mm
Tool to table Max.: 610 mm
Max. Working diameter: 1219 mm
Max. Stroke: 305 mm
Table Diameter: 610 mm
AGME C-150 Spot Riviter
Full inspection facilities including Mitutoyo Euro M574 Co-ordinate Measuring Machine
3 Dimension bridge type coordinate measuring machine with 3 axis and a granite table measuring 1160mm x 850m. Bridge aperture 710 x 560mm, fitted with a Renishaw M22634 probe.
P3000 Pro Pen – tractability and identification
Micro Percussion Marking, using a rapidly vibrating, computer guided instrument, the Pro Pen 3000 can quickly and accurately mark on a wide array of industrial materials. The principle of micro-percussion marking is based on making indents in the material using a vibrating tool, this will not weaken the material to be marked, whatever its thickness may be. Does not require the use of inks or consumables, prints up to 5 characters per second. It can mark characters, digits and logos. Linear, angular and circular marking is available.